See more parts for your Jeep Wrangler

Jeep JL 3.5"Inch Enforcer Lift Stage 3 18-Present Wrangler JL Unlimited EVO Manufacturing

$1,897.86

EVO Manufacturing

Model #EVO-3013S3

Free Shipping


Shopper Award

The EVO MFG 3.5"inch JL Enforcer Lift Suspension Systems lift your 2018 and up Jeep Wrangler JL 3.5"inches. Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift.

The JL Enforcer kits are specifically designed to lift your JL and maintain a performance spring rate, smooth ride quality while having the option of retaining factory shocks, maintaining wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 3-4 inch lift shocks or use of our EVO SPEC 2.5 inch Remote Reservoir King Shocks.

These kits come with a set of 3.5"inch lift springs specific to each corner which will keep the Jeep Wrangler JL more level side to side. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. The EVO MFG 3.5"inch JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill).

They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation. 3.5"inch lift is based on increase of our 4 Door Rubicon Model. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see higher increases in lift. Increases will vary.

Stage 1 kits includes all the necessary parts to lift your JL 3.5"inches.

Stage 2 kits include Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allow for caster adjustments.

Stage 3 kits include stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.

Stage 4 kits include stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

Note: All part number EXT kits include front and rear shock extensions.

Note: K Kits include EVO SPEC King Shocks.

Note: Retaining factory shocks while maintaining full wheel travel.

Note: Depending on actual tire variances and sizes, Some trimming of body sheet metal, fenders, bumpers and inner fender liner may be required with stated tire sizes to fully clear under compression.
Features:

  • JL 3.5"Inch Enforcer Lift Stage 3
  • Installation Time: 5.0-7.0 Hours
  • Lift Height: 3.5"Inch
  • Series: Enforcer
  • Mount Style: Bolt On
  • Stage: Stage 3
  • Hardware Included: Yes
  • Sold As: Kit

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2018-2020
Jeep Wrangler

Who is Evo Manufacturing?

Evo Manufacturing is a company specializing in aftermarket parts and accessories for offroad vehicles. They have been producing quality parts for years, such as upgraded suspension parts, brackets to steel bumpers. 

With the years in the industry, they have made a name for themselves. They have also proven that their products can match those from mainstream brands.

Jeep Experts

The company focuses on the Jeep platform. They have a comprehensive list of parts to upgrade your Jeep. 

Jeep vehicles have been a great part of the offroading industry and are used by many offroad enthusiasts. Evo Manufacturing took advantage of this and designed its products around this platform.

Quality Product

All of their products are made from high-quality materials and have been designed by highly qualified engineers. Each component is meticulously analyzed and manufactured. The parts are designed to fit perfectly in the vehicle, eliminating the need for extensive modification and conversion. This provides a hassle-free experience to their customers.

One-Stop-Shop

What is good about Evo Manufacturing is that they have all the parts you need to upgrade your Jeep. Using real-world experiences, they know what part you need to change and how to improve it. This is what makes Evo Manufacturing a successful company - knowing what the people want and advising them what they need.

Purchase Evo Manufacturing Parts at Vivid Racing

If you want to turn your Jeep into a formidable offroad vehicle, then Evo Manufacturing has all the right parts for you. Tried and tested to be tougher than stock, Evo Manufacturing is a company you could put your trust in. Visit Vivid Racing and check their list that would fit your specific requirements. 

All Products Manufactured by EVO Manufacturing shall have a Limited Lifetime Warranty on defects in material and craftsmanship. All products must be on the original vehicle it was installed on by the original purchaser and is not transferable.

Proof of purchase is required for all warranty claims.

EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product

EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs

All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.

Exceptions to stated warranty: Wearable items are not included in warranty. These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware.

Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.

EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.

EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.

Product Finish is not covered under warranty

Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.

EVO Manufacturing products that are used for competition and or racing immediately void all warranties.

EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.

EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.

EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.

Check out these other great products