HD Halo Technology. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.
Sizing: All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.
Mounting: The halos must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The halos can be modified if needed to fit certain applications. Up to 20 percent of the halo can be removed using side-cutting snips and still remain fully functional.
Wiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.
PWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:
White: White Low Power, 50 percent brightness
Red: White High Power, 100 percent brightness
Yellow: Signal, double brightness, flashing (dims if powered more than two seconds)
Black: Ground
All input wires activate the halos, at different brightness levels. All amber-colored halos ship with low priority drivers. This means that if both low and high power inputs are powered, the LED will light up with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up at 200 percent brightness momentarily, intended for signalling (dims automatically if powered for more than two seconds).
This entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.
Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!
Features:
Proprietary durable phosphor coating, for uniform solid appearance
Multi-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes
Extremely bright, high-density LEDs that are visible even in direct sunlight
Diode Dynamics started back in 2006 by Paul McCain. It started as a hobby. And using some parts from Radioshack, he was able to create some LED accent lighting which he sold to some of his friends.
From then on, the company kept on growing to offer more products and employ more people as they progressed. Today, the company is recognized as one of the most reputable LED light manufacturers in the market offering replacement LEDs, Full LED assemblies, multicolor accents and special unique modules.
From Importers to Manufacturers
During its early days, Diode Dynamics was just rebranding LED lights from overseas, but as they realize, they could create something better. So from then on, they manufacture their own products and have moved into a bigger facility with their design engineer. The company has its own light tunnel to measure beam patterns and various testbeds that ensures that their product is durable to handle whatever weather condition it is subjected to.
Driven by their passion, Diode Dynamics has become the largest specialty application aftermarket lighting manufacturer in the US.
Purchase Diode Dynamics Products at Vivid Racing
LED lights have come a long way since it was first introduced in the market. A lot of companies offer LED lights, but only a few can provide top-notch products that do not only perform well but last for a long time. Diode Dynamic is a brand that has all of these, and has been trusted by various enthusiasts for more than a decade. If quality lighting is what you are looking for, then Diode dynamics are for you. Visit Vivid Racing and see the list of their products that would fit your needs.
Satisfaction Guarantee
At Diode Dynamics, we want to ensure every customer is satisfied with their purchase. Therefore, we offer a straightforward satisfaction guarantee: If you aren't satisfied with your purchase, for any reason, just contact us within 30 days of your purchase and we will arrange a refund of your purchase price, or exchange the items with no hassle.
All Products: 3-Year Replacement Limited Warranty
Diode Dynamics carries a 3-year limited warranty on all products, for manufacturing defects or product failure. If you have an issue with any product, we will diagnose the issue with you, and you may be required to answer questions or assist in the diagnosis. If Diode Dynamics determines that your product is defective in material or workmanship, Diode Dynamics will issue an RMA number. An RMA number must be issued before any items are returned.
For approved warranty claims, Diode Dynamics will replace the defective product with the same product or, if it has been discontinued, one comparable in performance and value.
Diode Dynamics product warranty is limited to product replacement only. Diode Dynamics does not offer compensation or coverage of installation labor or time that may be required for replacement of warranty items.
U.S. Customers: All initial shipping costs are covered by Diode Dynamics. In most cases, you will immediately receive the new products with a return label. However, in some cases, you may need to use a provided return label to send back items first. Diode Dynamics will provide one free return label per order. You may return any number of items from the order in one box using the free shipping label. However, you will be responsible for return shipping costs for any other separate returns from the same order.
International Customers: You are responsible for return shipping costs, although Diode Dynamics will cover shipping costs for the replacement. You must return defective products before a replacement can be sent.
Select Products: 8-Year Limited Warranty
In addition to the above 3-Year Replacement Limited Warranty, Diode Dynamics carries an 8-year Limited Warranty on select products. Currently, this includes and is limited to all Stage Series products.
After 3 years of Replacement Limited Warranty, Diode Dynamics will continue to warrant that select products are free of defects for up to 8 years from when the product was ordered. These products must be returned at the customer's expense to Diode Dynamics, for inspection, and will be replaced or repaired, at the sole discretion of Diode Dynamics. Shipping back to the customer will be covered by Diode Dynamics.
Free Support Forever
Diode Dynamics always provides free support and assistance to any customer. If your warranty has expired, you will continue to receive free service, and we will assist you in determining a solution or possible repair to any issues you might be having with our products.
Stipulations All schedules are based on the number of days between original purchase date and receipt of RMA information by Diode Dynamics. All warranties are non-transferable. Warranty terms and policies are subject to change without notice.
All warranties, expressed or implied, are void if our warranty claim department determines that there is sufficient evidence of one or more of the following:
Negligence: Improper installation or improper use, including using or installing any product in a manner not specified by Diode Dynamics, or damage caused by improper installation.
Abuse: Damage beyond the limits of "normal wear and tear."
Unauthorized Repair: Repair service performed or attempted by an unauthorized party.
Unauthorized Dealer: Purchase of items through any unauthorized party.
Product Modifications We understand that some products may be modified in the course of installation or use by the customer to suit a particular need. However, opening, disassembling, cutting wires, or otherwise modifying any product in a manner not specified by Diode Dynamics will void the product warranty.
For modifications to wiring, electrical components, or connectors, our staff will assist as possible, but is trained to support problems that arise in the course of standard use, without modification. Product instructions and installation guidance should be followed as written.
Replacing lenses on lightbars will void the 3-year limited replacement warranty. However, the 8-year limited warranty will be upheld and in effect. In the case of moisture intrusion, you may be required to open and re-seal the lamp yourself. If issues persist, we may require that the lightbar is returned for repair.
WARNING: Cancer and Reproductive Harm
