Holley is the new standard in EFI! Whether you're engine swapping your classic car or need to manage 4000 horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever!
Dominator® EFI Vehicle Management Systems are intended for non-emissions street and racing engine applications. In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator® systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them. Need to run a turbocharged, nitrous injected 8 cylinder running water-methanol injection? No problem with Dominator® EFI. How about control a 4L80E transmission as well as the fuel and spark on your street rod? No problem. There are also enough inputs and outputs to allow the Dominator® VMSs to serve as their own data acquisition and control module. The Dominator® VMS will eliminate the need for additional controllers as they are all contained in this one unit. The only thing limiting the Dominator® Vehicle Management System is your imagination!
Features:
- Dominator EFI base kits come in several product variations to fit most popular domestic V8 engine applications such as; LS, SBC/BBC, SBF, BBF, and Chrysler engines
- Kits include the following: Dominator ECU, USB cable, ECU Power Harness, Engine Main Harness, EV1 Injector Harness, Bosch Wideband, ECU mounting hardware
- Integrated electronic transmission control - Operates GM 4L60E and 4L80E transmissions, Ford AODE and 4R70W with more to come in the future
- Integrated drive by wire throttle body control - Can control two drive by wire throttle bodies. Compatible with a number of DBW throttle bodies including GM, Chrysler, Ford, and Nissan
- Integrated dual channel wide band oxygen sensor controls - For monitoring both engine banks (NTK or Bosch sensors)
- Extensive amount of inputs and outputs allow for limitless combination of options. Allows for unit to be used as a complete data acquisition system as well
- Individual cylinder fuel and spark control allows you to unlock your engine's potential
- 1-7 Bar MAP sensor capability - For naturally aspirated or boosted applications
- Fuel Map and Learn Function Smoothing - Helps to smooth rough areas of the maps
- Self-tuning fuel table strategy greatly simplifies tuning process - The more you drive it, the more it learns
- "Quick Start" strategies - For faster engine starting
- Allows for use of common OEM sensors as well as custom sensor calibration input
- Two channel knock control sensor inputs for both one or two wire knock sensors
- Store and select between four calibrations with Multi Map Selector (Part Number 558-407)
HARDWARE- ECU is fully potted and can be mounted in the engine compartment or interior - See images for dimensions
- Sealed automotive and marine grade connectors
- Optional Digital Displays - 7" Digital Dash (PN 553-106) / 3.5" Touch Screen LCD (PN 553-108)
- 12.3" Pro Dash (PN 553-111) and 7" Race Dash (PN 553-106) features full gauge layout customization, and nearly limitless tuning options.
DATA VISUALIZATION TOOLS- Data Logger - Analyze and export your data with sophisticated, but user friendly tools - Internal logger has 4 GB of memory
- Strip Chart - For real-time data viewing
- Fully Configurable lap top Gauge Panel - Life-like gauge cluster on your laptop screen
- Racepak Integration Module Available.
- Data logger - Smoothing, multiple graph view, pre-defined notes fields and more..
8 STAGE NITROUS OXIDE CONTROL- Fully featured nitrous control eliminates the need for a separate nitrous controller device
- Can be configured "Wet" or "Dry" with closed loop feedback
- Progressive control based on time, RPM, or boost, requires part # 554-111
- Lean or rich safety cutoff
- Full timing retard/control configurability per stage based on RPM or time
INTEGRATED WATER/METHANOL INJECTION CONTROL- Uses Holley water/meth solenoids specially designed and calibrated for use with this EFI system to allow the user to enter water/meth flow as a percentage of fuel injector flow for water/meth tuning precision unmatched in the industry
- Allows for two nozzles to be controlled
- Nozzles available from 400 to 1000 cc/min
- Complete control of pump activation, and low system safety features
TURBOCHARGER BOOST CONTROL- Fully featured boost control capability eliminates the need for a separate boost control device
- Can be configured to control boost based on time, gear, speed, and manual inputs
- Gear based boost control configurable by several different methods
- "Boost Builder" functions offer the ability to assist building boost on the starting line by altering ignition timing, fueling, as well as nitrous oxide activation. Can also be used as an anti-lag function
Who is Holley EFI?
Holley EFI is a division of Holley that is one of the best aftermarket brands in the automotive industry. Holley EFI is a company known for producing high-performance parts specifically electronic fuel injection system parts. The company’s history can be traced back to the late 1800s when brothers George and Earl Holley learned how to make pattern casting that enabled them to build one-cylinder engines. Then in 1903, they provided Henry Ford with the carburetor and became the industry leader in fuel system technology. The rest is, as they say, history.
Fuel System Experts
For over a century, Holley EFI has always been at the forefront of designing parts for the fuel delivery system. From electronic fuel injections kits and fuel system accessories, Holley EFI has it all. Today, Holley EFI is considered one of the top aftermarket brands in the world.
Being Part Of History
Not everyone is aware that Holley provided fuel systems components for the military during WWII, and it is not for automobiles but planes and boats. Since then, the company has become a dominant force when it comes to fuel delivery system components and has been used by many champion racers and enthusiasts.
Choice Of Champions
Since the 1960s, Holley has powered every NASCAR sprint cup car and every winning NHRA Pro Stock Team even today. It is a testament to the kind of products the company produces.
Purchase Holley Products At Vivid Racing
If you are in the market for high-quality fuel delivery system components for your vehicle, then choose the best brand out there, and that is Holley EFI. Not every company can boast 100 years of experience.
To know more about Holley EFI, visit Vivid Racing and check out their list of products that fit your specific requirement.
90 Day Limited Warranty applies to B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids).
Holley Performance Products warrants its Holley Street Avenger™ Carburetor to be free from defects in material and workmanship for the life of the product on parts and one year on repair labor. After a period of one year, Holley will charge standard rates for repair labor. For any Holley Street Avenger Carburetor used in any type racing or off-road use will only be covered by a one (1) year limited warranty on parts and labor. Warranty performance will be initiated by returning the alleged defective product to HOLLEY PERFORMANCE PRODUCTS with the original, dated purchase receipt. Purchaser is to call toll free the Holley Factory Service number at 1-866-464-6553 to receive details and shipping instructions.
For full warranty information please
Click Here
WARNING: Cancer and Reproductive Harm
